Discussion in "Project Help" started by    Sahar    Jun 8, 2007.
Fri Jun 08 2007, 08:51 AM
I have a problem with my stepper motor controller circuit. I used L293D and Atmega16L but there were no signal on L293D output pins although there were signals on AVR pins. I don't know what could the problem be. If anyone has a complete circuit diagram please let me know.
 tienduhieu like this.
Fri Jun 08 2007, 10:14 AM
I don't know what circuit you are making.. but i send you a small circuit where one DC motor is connected to microcontroller via L293D..
L293D is for DC motors only....

but if you want to connect a stepper motor.. please use ULN2003 because that is best for it...
here is the screenshot... for L293D connected to ┬ÁC

the connection SpeedN is -ve pole of DC and SpeedP is +ve pole of DC motor.
and use pullups to 5V for speedN and speedP.
please search in google for ULN2003 and stepper motor..
 tienduhieu like this.
Tags DC motor driver L293DH-bridge motor driver L293DL293D schematic
Fri Jun 08 2007, 03:12 PM
Thanks. I'm trying to build a obstacle avoiding robot and for controlling motors I've used L293D. I don't know what's wrong with it that does not have any signal on its output pins. I dont know whether the EN pins are active low or high.Also I didn't find the data sheet u said?
I'll try to use ULN2003.
 tienduhieu like this.
Fri Jun 08 2007, 06:09 PM
here is the datasheet L293D
and.. yes.. for stepper motor ULN2003 is best. i hope you found relevent material from internet regarding the usage. :-)
 tienduhieu like this.
Fri Jun 08 2007, 07:48 PM
Thanks alot. I know how to find a data sheet in internet I will really be happy if ULN2003 works!
 tienduhieu like this.
Fri Jun 08 2007, 08:27 PM
sure.. ULN2003 works perfectly... actually ULN2003 is just to provide sufficient voltage to the stepper motor because microcontroller itself cannot source the current required for the motor coil. so we use ULN2003 or if you dont want to use ULN then use simple PNP transistor based circuit. but ULN2003 is recommended and easy to use.. and make no mess on the board
 tienduhieu like this.

Get Social


Powered by e107 Forum System


Thu May 06 2021, 01:11 PM
Hello, constantly i used to check blog posts here in the early hours in the morning, since i like to find out more and more. Local Dating https://datingsitesww.com
Thu May 06 2021, 12:33 PM
It's an remarkable article in support of all the web people; they will get benefit from it I am sure. senior dating sites http://onlinedatingdd.com/
Thu May 06 2021, 10:24 AM
What's Taking place i am new to this, I stumbled upon this I have discovered It absolutely useful and it has aided me out loads. I hope to contribute & help other users like its helped me. Good job. match dating https://onlinedatingtind.com/
Tue May 04 2021, 08:34 PM
Hi there! I could have sworn I've been to this site before but after browsing through some of the post I realized it's new to me. Anyways, I'm definitely glad I found it and I'll be book-marking and checking back frequently! check my score https://creditscorecheckn.com
Tue May 04 2021, 06:39 PM
What's up everyone, it's my first go to see at this web page, and post is really fruitful in support of me, keep up posting these types of articles. Best Credit Score https://creditscoresids.com



Thu Jun 25 2020, 03:46 PM
Mon Jun 22 2020, 03:03 PM
Tue Jun 16 2020, 05:10 PM
Sat Jun 13 2020, 09:43 PM
Thu May 21 2020, 12:44 PM
Thu May 21 2020, 01:28 AM
Wed May 20 2020, 07:05 PM
Wed May 20 2020, 11:52 AM


Guests: 126, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123