6.4 inch MS Pipe Hole Sequence Calculations
Discussion in "General help Guidance and Discussion" started by coolmirza143 Jul 4, 2014.
Fri Jul 04 2014, 06:13 pm
I have 6.4 inches MS Pipe, i need 3mm holes on its surface.
Pipe Diameter is 6.4 inches.
Pipe Length is 60 inches.
Tell me how to calculate that how many holes per line i will drill.
Pipe Diameter is 6.4 inches.
Pipe Length is 60 inches.
Tell me how to calculate that how many holes per line i will drill.
Sat Jul 05 2014, 12:15 pm
you need to provide spacing between holes 
then devide circumference of pipe with 3mm + spacing you will get holes per line and then to get number of line divide area of pipe with line height + spacing.
then devide circumference of pipe with 3mm + spacing you will get holes per line and then to get number of line divide area of pipe with line height + spacing.
Powered by e107 Forum System
ztaletpzca
Wed Apr 24 2024, 11:19 pm
IrardlPex
Wed Apr 24 2024, 08:42 pm
Charlestehed
Wed Apr 24 2024, 05:20 pm
Robertgurse
Wed Apr 24 2024, 02:43 pm
Richardedils
Wed Apr 24 2024, 04:07 am
Malcolmaccek
Wed Apr 24 2024, 01:21 am
ChrisLub
Tue Apr 23 2024, 05:21 pm
Davidbab
Tue Apr 23 2024, 10:41 am