Discussion in "General help Guidance and Discussion" started by    masteryo1234    Sep 25, 2013.
Wed Sep 25 2013, 08:07 pm
#1
I have a 8051 kit, i have used AT89s8253 So far , and have downloaded the hex files into that IC using 8051FLASH software provided by ATMEL. I have a project to complete, due to non availability, i had to go for AT89C51 . But this IC is not listed in 8051FLASH.. Can anybody help me out as how now can i download the HEX file into my IC? I have used a training kit board which i connected via USB to PC for both power supply and programming...
Wed Sep 25 2013, 09:50 pm
#2
Bad news
The AT89c51 can't be programmed that way.
Although it has flash memory you need a parallel programmer to use it.
I suggest you trade your AT89c51 for a AT89s51.
There are other micros you could use, but be sure to check how they are programmed.
The safest way is to check you software's device list.

 masteryo1234 like this.
Thu Sep 26 2013, 08:18 am
#3
Oh.. It means i have no other option.. I believed there was a programmer for this.. Anyway, I will get the 89S51.. It's available .. Thanks a lot

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

Michailqfh
Fri Mar 29 2024, 01:53 am
Bobbyerilar
Thu Mar 28 2024, 08:08 am
pb58
Thu Mar 28 2024, 05:54 am
Clarazkafup
Thu Mar 28 2024, 02:24 am
Walterkic
Thu Mar 28 2024, 01:19 am
Davidusawn
Wed Mar 27 2024, 08:30 pm
Richardsop
Tue Mar 26 2024, 10:33 pm
Stevencog
Tue Mar 26 2024, 04:26 pm