security access control system using 89s52
Discussion in "New Ideas regarding projects" started by gaurav007 Apr 12, 2012.
Thu Apr 12 2012, 03:25 pm
Security is prime concern in our day-today life. Every one wants to be as much as secure as to be possible.
An access control systems forms a vital link in a security chain. The micro controller based digital lock
presented here is an access control system that allows only authorized persons to access a restricted area.
The system comprises a small electronic unit with a numeric keypad, which is fixed out side the entry door to
control a solanoid-oprated lock. When an authorized person enters predetermined number (password) via
the keypad, the relay operated for a limited time to unlatched the solenoid-operated lock so the door can be
pushed/pulled open. At the end of preset delay, the relay reenergizes and the door gets locked again. If the
entered password is correct the unit gives a longer beep of one second. And if the entered password is
wrong it gives three small beeps. When the code has been incorrectly entered four times in a row, the code
lock will switch to alarm mode and operate an alarm relay. Alarm relay are turned off after entering a valid
User Access Code. This function thwarts any attempt by ‘hackers’ to quickly try a large number of codes in a
sequence.
the main aim is to compile the code kindly help me the code is attached below
i am unable to identyfy the compiler used
An access control systems forms a vital link in a security chain. The micro controller based digital lock
presented here is an access control system that allows only authorized persons to access a restricted area.
The system comprises a small electronic unit with a numeric keypad, which is fixed out side the entry door to
control a solanoid-oprated lock. When an authorized person enters predetermined number (password) via
the keypad, the relay operated for a limited time to unlatched the solenoid-operated lock so the door can be
pushed/pulled open. At the end of preset delay, the relay reenergizes and the door gets locked again. If the
entered password is correct the unit gives a longer beep of one second. And if the entered password is
wrong it gives three small beeps. When the code has been incorrectly entered four times in a row, the code
lock will switch to alarm mode and operate an alarm relay. Alarm relay are turned off after entering a valid
User Access Code. This function thwarts any attempt by ‘hackers’ to quickly try a large number of codes in a
sequence.
the main aim is to compile the code kindly help me the code is attached below
i am unable to identyfy the compiler used
Thu Apr 12 2012, 10:17 pm
thanks for reply
can you please send the link of BASCOM compiler download
can you please send the link of BASCOM compiler download
Fri Apr 13 2012, 08:57 am
i tried myself to compile code in bascom but it fails to include the lib files. how can i get the lib files viz. reg51.lib, 24c02.lib and LCD_lib.lib
Sat Apr 14 2012, 08:39 am
sorry I have never worked on bascom. you have to ask the author who wrote the code or gave you those files.
Powered by e107 Forum System